Series:Mark V DS200

  Product Description

  The General Electric model DS200IPCSG1A is described as an IGBT P3 buffer card used in conjunction with the Mark VI or EX2000 series.There is a connector on the board.There are six screws on the IPCS model for adjustment.

  feature

  Voltage regulation of IGBT module

  Current monitoring and protection

  Overload and short circuit protection

  DS200IPCSG1A is a high-quality buffer board designed specifically for use with GE IGBT modules.It provides advanced functionality and reliable performance.

  The DS200IPCSG1A model is designed by General Electric as an Insulated Gate Bipolar Transistor(IGBT)P3 Buffer Card(IPCS).When General Electric manufactured this model,it was designed for the Mark V or EX2000 series.This model has six screws for adjusting the hardware of the connected IGBT model;Adjusting screws requires a screwdriver.The screws used to adjust IGBT hardware are labeled C2E-1-A,C2E1-B,C2E-2-B,C2E-2-A,C1-A,and C1-B.Please ensure that extra care is taken when adjusting the screws as they may break and require replacement.

  Like many other models produced by General Electric,the DS200IPCSG1A model will also be connected to the power supply;When the model is connected to a power source and requires maintenance or replacement of equipment,the power must be disconnected.If the power is continuously disconnected,it may cause injury or even death in some extreme cases.It should also be noted that when adjusting the screws on the IPCS model,the power should be disconnected to prevent vibration.

  application area

  The DS200IPCSG1A GE IGBT P3 buffer board is commonly used in various industrial applications,including power electronics,motor drivers,and renewable energy systems.