Series:Mark V DS200

  Product Description

  The DS200FSAAG2A GE on-site power amplifier board amplifies the signal to achieve the required level of signal strength.

  feature

  High power amplification capability

  Robust and reliable design

  Wide operating temperature range

  Flexible installation options

  The DS200FSAAG2A GE on-site power amplifier board is a high-performance amplifier designed specifically for on-site applications.It provides reliable power amplification in various industrial and power generation systems.With its sturdy design and wide operating temperature range,it can ensure stable and efficient performance even in challenging environments.This board provides flexible installation options to adapt to different application requirements.

  The GE on-site power amplifier board DS200FSAAG2A has 5 jumpers,1 10 pin connector,and two fuses.It is also filled with multiple test points.The fuse on the GE on-site power amplifier board DS200FSAAG2A has a rated voltage of 600 volts,a current of 30 amperes,and is replaceable.If you suspect that the board is not functioning,please check the fuses and confirm that one or both of them have blown before deciding to replace the board.If too much current is supplied to the circuit board,this situation can occur.The design purpose of fuses is to protect the circuit board by preventing high-voltage vibrations from damaging components on the circuit board and other components in the driver.

  Please consider having a backup fuse on hand in case the fuse blows is a good strategy.Ensure that only fuses with the same rating are used for replacement.Many fuses are printed with the rated specifications you need to know.You can also check the information that comes with the motherboard provided by the factory.It will include the rated value of the fuse,as well as a description and installation instructions for the jumper.

  When replacing a fuse,there will be no power supply on the board.Therefore,please disconnect the power supply to the drive first.The fuse is fixed in a clip,which not only connects the fuse to voltage but also holds the fuse in place.Pull the fuse with one hand to remove it from the clip,and stabilize the circuit board with the other hand to reduce pressure on the circuit board.

  application area

  DS200FSAAG2A can be used in industries such as manufacturing,energy,and automation,where reliable power amplification is crucial.