Series:Mark V DS200

  Product Description

  DS200FSAAG1A(FSAA)is a single-phase on-site power gate amplifier board used for DC2000 DC drives.This model is an irreversible on-site power supply device for plugging leaks.The L2 and L3 power lines of this model have a 30 ampere fuse.

  feature

  High power amplification capability

  Designed specifically for rugged industrial environments

  Compatible with GE systems

  Easy to install and integrate

  DS200CDAAG1A is a high-quality on-site power amplifier board manufactured by GE.It is specifically designed to meet the power amplification requirements of GE systems,providing enhanced performance and reliability.

  The GE on-site power amplifier board DS200FSAAG1A has 5 jumpers,1 10 pin connector,and 2 fuses.It is also filled with multiple test points.The GE on-site power amplifier board DS200FSAAG1A is designed to connect to another driver component.The bracket on another component can be fixed to the circuit board with screws.The holes on each corner of the circuit board align with the bracket,allowing you to insert screws into the circuit board.Be careful when tightening the screws to avoid damaging the circuit board due to excessive tightening.The area around the holes on the circuit board has a metal surface to help protect the circuit board.

  Check the position of the jumper on the previous DS200FSAAG1A board and copy these positions on the newly installed board.In this way,the behavior of the new board will be the same as the hardware location of the previous board.Align the new board with the bracket and tighten the screws with a screwdriver.Tighten the screw with two hands,guide the screwdriver into the screw head with one hand,and rotate the screw with the other hand.Ensure that all four screws on the bracket are evenly tightened.

  There are two sets of FSAA boards,one related to the DS200FSAAG1A model and the other labeled as DS200FSAAG2.Both are irreversible and related to the on-site power supply,but the DS200FSAAG2 group is only used with irreversible on-site power supply,while the DS200FSAAG1 group is used with irreversible plug-in on-site power supply,but can work in DS200FSAAG2 or DS200FSAAG2.NRX settings.

  application area

  The DS200CDAAG1A GE on-site power amplifier board is commonly used in power generation,oil and gas,and manufacturing industries.