Series:Mark V DS200

  Product Description

  DS200ACNAG1A GE computer network board is used for power system control.

  feature

  Efficient performance

  reliability

  stability

  DS200ACNAG1A GE computer network board is a computer network board used for power system control.

  DS200ACNAG1A is an additional resource computer network board of General Electric Company.The more well-known name for this board is ARCNET,which was created as a component of the Mark V series.Mark V is the fourth commercial Speedtronic heavy-duty gas and steam turbine management system released by GE.It is a microprocessor based triple redundant system that achieves extremely high reliability due to multiple backups of all critical control and protection parameters.It also includes functions such as direct sensor interface,built-in diagnosis,and online maintenance.

  It is worth noting that the traditional ARCNET system runs at a speed of 2.5 Mbps.This causes signals on the network to occur within approximately 400 ns.This time limit limits the size of the ARCNET system,and in fact,the length of the system cannot exceed four miles.If this time is exceeded,the system will begin to experience an extended timeout when sending messages between nodes.

  DS200ACNAG1A only has very few components on very small circuit boards.These components include four metal film resistors(R1/R2/R3/R4),two transistors,one diode,and three capacitors(C1/C2/C3).The board has two openings,with metal cut on both sides.Cards.They are labeled as GND1 and GND2.The center of the board is equipped with two communication relay devices.The top surfaces of both components are printed with relay diagrams.

  The last three components on DS200ACNAG1A are a single six pin male vertical pin terminal connector and two female BNC plugs placed along the centerline of the circuit board.These plugs are designed to facilitate LAN communication.

  application area

  The DS200ACNAG1A GE computer network board is suitable for power system control.