Series:1336 FM AC Driver

  Product Description

  1336-L5 is a control interface board that is part of the 1336 frequency adjustable AC frequency converter series.It is a 24 VDC/VAC logic board without an encoder.It is designed for use with 1336 Plus,1336 Force,and 1336 Impact drives,especially the frame AH(excluding frame C drives rated at 25 HP and 30 HP).This board allows for the connection of various external signals through contact closure.

  feature

  Provide reliable control interface for A-B system

  Designed specifically for compatibility with A-B devices

  Easy to install and use

  Durable and long-lasting

  The 1336-L5 A-B control interface board is specifically designed to provide reliable control interfaces for A-B systems in industrial automation applications.It is part of the 1336 series and is seamlessly compatible with A-B devices.With its simple installation process and user-friendly interface,it can effectively control and monitor the A-B system.This board can withstand harsh industrial environments,ensuring durability and long-term performance.

  1336-L5 is a control interface option card that is part of Allen Bradley's 1336 Plus frequency adjustable AC frequency converter.It is specifically compatible with 1336 Plus,1336 Force,and 1336 Impact drives,especially Frame AH drives(excluding Frame C drives rated at 25 HP and 30 HP).The control interface board is installed at the bottom of the main control board,located at the top of the TB2 terminal block.1336-L5 is a 24 VDC/24 VAC logic board used to receive additional external contact closure signals.These signals can be any circuit that provides a High=True logic state,such as hardwired circuits,programmable logic controller(PLC)output modules,auxiliary contacts,sequencers,and similar circuits that provide a rated signal voltage of 24 VDC/VAC.1366-L5 has twelve(12)screw type terminals designed to terminate wire sizes 2.1 and 0.30 mm2(14 and 22 AWG)copper wire.Tighten the connection to a torque of 0.90 to 1.13 Nm(8 to 10 lbs.in.).Terminals 19 and 20 are only used for start/stop functions.Terminal 19 can be programmed to accept status,run,forward,and start inputs,while terminal 20 can be configured as a stop/fault reset signal.Other inputs that can be connected to the TB3 terminal block available on the control interface board include reverse/forward;Jogging;1-3 inputs for auxiliary and speed selection.This interface board supports 2-wire and 3-wire control wiring configurations.Other commands that can be initiated through the control interface board include acceleration,deceleration,synchronization,and lateral movement.30 mm2(14 and 22 AWG)copper wire.Tighten the connection to a torque of 0.90 to 1.13 Nm(8 to 10 lbs.in.).Terminals 19 and 20 are only used for start/stop functions.Terminal 19 can be programmed to accept status,run,forward,and start inputs,while terminal 20 can be configured as a stop/fault reset signal.Other inputs that can be connected to the TB3 terminal block available on the control interface board include reverse/forward;Jogging;1-3 inputs for auxiliary and speed selection.This interface board supports 2-wire and 3-wire control wiring configurations.Other commands that can be initiated through the control interface board include acceleration,deceleration,synchronization,and lateral movement.30 mm2(14 and 22 AWG)copper wire.Tighten the connection to a torque of 0.90 to 1.13 Nm(8 to 10 lbs.in.).Terminals 19 and 20 are only used for start/stop functions.Terminal 19 can be programmed to accept status,run,forward,and start inputs,while terminal 20 can be configured as a stop/fault reset signal.Other inputs that can be connected to the TB3 terminal block available on the control interface board include reverse/forward;Jogging;1-3 inputs for auxiliary and speed selection.This interface board supports 2-wire and 3-wire control wiring configurations.Other commands that can be initiated through the control interface board include acceleration,deceleration,synchronization,and lateral movement.Forward and start inputs,while terminal 20 can be configured as a stop/fault reset signal.Other inputs that can be connected to the TB3 terminal block available on the control interface board include reverse/forward;Jogging;1-3 inputs for auxiliary and speed selection.This interface board supports 2-wire and 3-wire control wiring configurations.Other commands that can be initiated through the control interface board include acceleration,deceleration,synchronization,and lateral movement.Forward and start inputs,while terminal 20 can be configured as a stop/fault reset signal.Other inputs that can be connected to the TB3 terminal block available on the control interface board include reverse/forward;Jogging;1-3 inputs for auxiliary and speed selection.This interface board supports 2-wire and 3-wire control wiring configurations.Other commands that can be initiated through the control interface board include acceleration,deceleration,synchronization,and lateral movement.

  The Allen Bradley 1336-L5+24 volt AC/DC control interface board is a logic control interface option board for 1336 frequency adjustable AC frequency converters,providing a way to connect various driver commands and functions.This board,like all other logic interface boards,is located on Port A of the main control board and has 9 control inputs that can be programmed for any selected function.In order to function properly,the 1336-L5 logic control interface board requires a circuit that can operate under high=true logic and requires a user provided 24V AC/DC voltage to function properly.The board can also function normally,and the circuit can generate up to 8 V DC/10 V AC and 1.5/2.5 mA in low state,with a voltage range of+20 to+26 V AC,and a source current of 10 mA per input in high state.1336-L5 can be used to program various driver commands and functions,including 2 driver acceleration/deceleration control inputs,allowing users to choose the acceleration and deceleration time used by the driver.1336-L5 can also be used for local control,providing users with proprietary control over drive logic,and also helping to control forward/reverse functions,which control reverse and forward operations.This board can also be used to control various other drive functions,such as enable,magnetic flux enable,jog,digital potentiometer,ramp,reset,and start functions.1336-L5 is installed at the 2nd and 3rd pins,as well as the 17th and 18th pins of the J1 jumper on the main control board,along with the 1771-OB,-OQ,-OBB,-OBD,-OBN,and-OQ16 PLC modules.

  application area

  The 1336-L5 A-B control interface board can be applied to various industrial departments,including manufacturing,process control,and automation.It is an ideal choice for controlling and monitoring A-B systems in factories,power plants,and other industrial facilities.

POLYOL 15%, POLYOLMER POLYOL 15%, POLYOLMER 15%, POLYMERIC POLYOL 15%, POLYMERIC 15%, WANOL F3115P, PPG-3601, PPG 3601, Y-1537, HL-109,LPOP-2015

POLYOL 25%, POLYOLMER POLYOL 25%, POLYOLMER 25%, POLYMERIC POLYOL 25%, POLYMERIC 25%, WANOL F3125P, KE-1950, PPG-3602, PPG 3602, Y-1564, HL-108, ARCOL-1366, LPOP-2025

POLYOL 45%, POLYOLMER POLYOL 45%, POLYOLMER 45%, POLYMERIC POLYOL 45%, POLYMERIC 45%, WANOL F3145P, WANOL F3148P, CS-743, Y-7930, V-3943A, HS-100, LH-50, LH-100, LH-200, LUPRANOL-4600, LHS-50, LHS-100

WANOL POP2045, WANOL POP2140, WANOL POP3630, WANOL POP3628, WANOL F3135, WANOL F3140, WANOL F3150, WANOL F3160, WANOL F3180, KE-878N, HL-400, INOVOL, PURANOL, WANOL, LUPRANOL, ARCOL

TDI:

Tolulene diisocyanates, TDI 80/20, WANHUA TDI, BASF TDI, HANWHA TDI, COVESTRO TDI, DAHUA TDI, JULI TDI, Lupranate TDI-80, WANATE TDI-80, WANNATE PM-200, WANNATE PM-100, 44V20L, M20S, 5005, Tolulene diisocyanates 80/20, Desmodur T80/20, Desmodur T80