SQM5... servo motor
The main application areas are large and medium-sized power fuel and gas burners, as well as thermal process equipment.
This actuator is mainly used to control gas flow, fuel, and combustion air volume based on load: combined with a 3-digit floating point regulator or continuous regulator (such as 4-20mA) and/or operated directly through the burner controller
Product features
1. Electric actuator torque up to 40 Nm
2. Clockwise and counterclockwise rotation models
3. Running time 10 to 90 seconds
4. Different types of connecting shaft specifications are optional
5. With 1 or 2 driven connecting shafts, the driven shaft can be replaced or used separately
6. Expansion can be achieved through electronic modules that utilize continuous signals for control and position feedback
7. Internal and external position indication
8. Can separate the driven shaft and camshaft separately
Specification parameters
Adjust the angle between 0 ° and a maximum of 160 °
Protection category I
The condition for the protection level of IP54 is to install punched holes that are kept closed or have undergone corresponding sealing treatment, and it is the corresponding cable conduit specification
Working environment operating standard DIN EN 60721-3-3
Climate condition level 3K3
Mechanical condition level 3M3
Temperature range -20...+60 ° C
-15...+60 ° C, for specifications of 18Nm
Humidity<95% rF
Weight is approximately 3.3Kg
The service life is 250000 start-up cycles (off → on → off) under rated torque load conditions throughout the entire rotation angle range.
2000000 adjustment cycles under 75% rated torque load conditions within a 10 ° rotation angle range.