Modern and advanced automatic poultry equipment for broiler chicken


Main components of chicken hosue



 

1. Base:	Concrete and steel foundation bolts
2. Column and beam:	material Q345(S355JR)or Q235(S235JR) steel, all bolts connection ,straight cross-section or Variable cross-section
3. Bracing:	X or V or other type bracing made from angle , round pipe etc.
4. Galvanized C or Z purlin:	size from C100~C320,Z160~Z300
5. Roof and Wall Panel:	1.Single colorful corrugated steel sheet --Thickness:0.12-1.2mm; Width: 310-1150mm, etc.  2.Sandwich panel with EPS, rock wool, glass wool , PU etc. insulation -- Thickness around 50mm~150mm;  Width : 970mm or 950mm
6. Vertical and transversal support:	Q235 angle steel, round bar or steel pipe.
7. wall	Wire meshes with curtain system or sandwich panel
8. equipment	1.Main feed line system 2.Pan feeding system 3.Nipple drinking system 4.Ventilation system 5.Cooling pad system 6.Spraying system 7.Heating system 8.Environment control system
9. life span	50 years
10 packing	Standard container package 40 GP or 40 HQ container
11. size	Customized
13. Installation on site	Available

 
 
Environment control of poultry shed



 
1.       Cooling pad system
Evaporative cooling pad system works in the condition of negative pressure, the cooling pad is installed on one side of the wall, fan installed other side. When air flow through cooling pads, the water evaporation absorbs a lot amount of heat.
The height of cooling pad is 1.5-2.2m, the area of cooling pad in chicken house is about 6-8 times than the fans.
 
 
2.       ventilating system
The main parts of ventilation system is the big fan and small fan. They are controlled by the control system. The NO. of the fans to run was decided by the temperature of the poultry house.
About 200m2 need 1 big fan and 15-20m need a small fan, this is the standard to design the quantity of fans in chicken house.
 

3. Chicken breeding equipment  on the ground 



4.Performance parameters of feeding and drinking  system
 
(1) High-quality special driving reduction motor. Power: 0.75kw 380voltage
 
(2) Hopper capacity :100l
Material: Hot-DIP galvanized sheet. Coat120g/m2
 
(3) Feeding system: Diameter of conveying pipe: Diameter: 45mm

Material: Hot-DIP galvanized sheet pipe r.

Spring auger from South Africa feeding capacity: 450kg/h.

(4) Nipple drinking system consist of water front parts , drinking system ,hanging system ,regulator ,water end parts.
 Capacity /nipple  :8-12 birds/nipple birds in cage : 12 birds/nipple breeder : 10birds/nipple 

5. Environment control system

This system saves the labor and the resources under the condition of assuring the optimum growth environment of the chicken. It is imported from Israel can set an optimum working mode according to the local climate and raising environment

 

6 .Spraying and disinfecting system

This system effectively cools, humidifies, dedusts and disinfects the chicken house(the temperature is quickly reduced by 3-8 degrees centigrade within a few minutes)

 

  

Our services :

*Site selection of standardization chicken farm

*chicken house design

*Construction guidance

*Breeding worker training

*On site technology instruction

*Using South Africa auger,

*TaiWan gear motor,

*and using top quality material for each accessory,

Advantages to use our automatic poultry equipment :

*Time saving

*Labour saving

*Increasing chicken living rate.

*High quality to ensure non stopping running of your house.

*Comparatively cheap price.