Electric Wire Cable Overhead AAAC Aluminium Alloy Conductor

1.Application

 Used as bare overhead conductor for primary and secondary distribution. Designed for utilizing a high-strength aluminum-alloy to achieve a high strength-to-weight ratio; affords good sag characteristics.
 (1).AAAC conductors are extensively used for overhead distribution and transmission lines adjacent to  ocean coastlines where there can be a problem of corrosion in the steel of an ACSR construction. (2).The aluminum alloy conductors are used in replace of single-layer ACSR  conductors to reduce  power loss in overhead distribution and transmission lines,when replacing the aluminum conductor steel reinforced , the AAAC can save 5-8% of the construction cost.
(3)AAAC referred to have higher strength but lower conductivity than pure aluminum. Being lighter, alloy conductors can sometimes be used to replace the conventional ACSR.


2.Standard:
ASTM B399, BS EN50183 ,BS 3242,DIN 48201,IEC 61089


3.Specification

All Aluminium Alloy Conductors(AAAC)                      ASTM  B 399
AREA		Stranding	Wire Dia.	Approx.  overall diameter	Weight	Nominal  Breaking Load	Nom. DC resistance  at 20 Deg.
Nominal	Actual
AWGorMCM	(mm2)		(mm)	(mm)	(kg/km)	(kN)	(ohm/km)
6	13.3	7	1.554	4.67	37	4.22	2.5199
4	21.15	7	1.961	5.89	58	6.71	1.5824
2	33.63	7	2.474	7.42	93	10.68	0.9942
1/0	53.48	7	3.119	9.36	148	16.97	0.6256
2/0	67.42	7	3.503	10.51	186	20.52	0.4959
3/0	85.03	7	3.932	11.8	234	25.86	0.3936
4/0	107.23	7	4.417	13.26	296	32.63	0.3119
250	126.66	19	2.913	14.57	349	38.93	0.2642
300	152.1	19	3.193	15.97	419	46.77	0.2199
350	177.35	19	3.447	17.24	489	52.25	0.1887
400	202.71	19	3.686	18.43	559	59.74	0.1650
450	228	19	3.909	19.55	629	67.19	0.1467
500	253.35	19	4.12	20.6	698	74.64	0.1321
550	278.6	37	3.096	21.67	768	83.80	0.1202
600	303.8	37	3.233	22.63	838	91.38	0.1102
650	329.25	37	3.366	23.56	908	97.94	0.1016
700	354.55	37	3.493	24.45	978	102.20	0.0944
750	380.2	37	3.617	25.32	1049	109.60	0.0880
800	405.15	37	3.734	26.14	1117	116.80	0.0826
900	456.16	37	3.962	27.73	1258	131.50	0.0733
1000	506.71	37	4.176	29.23	1399	146.10	0.0660

 

6201 All Aluminum Alloy Conductor                            ASTM B399
Code Name	Area		Size&Stranding   of ACSR with  equal diameter	No. and  diameter	Overall  diameter	Weight	Nominal  breaking  load
	Nominal	Actual
	MCM	mm2	AWG or MCM	mm	mm	kg/km	kN
AKRON	30.58	15.48	6	7/1.68	5.04	42.7	4.92
ALTON	48.69	24.71	4	7/2.12	6.35	68	7.84
AMES	77.47	39.22	2	7/2.67	8.02	108	12.45
AZUSA	123.3	62.38	1/0	7/3.37	10.11	172	18.97
ANAHEIM	155.4	78.65	2/0	7/3.78	11.35	217	23.93
AMHERST	195.7	99.22	3/0	7/4.25	12.75	273	30.18
ALLIANCE	246.9	125.1	4/0	7/4.77	14.31	345	38.05
BUTTE	312.8	158.6	266.8	19/3.26	16.3	437	48.76
CANTON	394.5	199.9	336.4	19/3.66	18.3	551	58.91
CAIRO	465.4	235.8	397.5	19/3.98	19.88	650	69.48
DARIEN	559.5	283.5	477	19/4.36	21.79	781	83.52
ELGIN	652.4	330.6	556.5	19/4.71	23.54	911	97.42
FLINT	740.8	375.3	636	37/3.59	25.16	1035	108.21
GREELEY	927.2	469.8	795	37/4.02	28.14	1295	135.47

 

AAAC (Characteristics of A2 Conductors)                 IEC 61089
Code number	Area	Number of wires	Diameter		Linear mass	Rated strength	D.C resistance
			Wire	Cond
	mm2		mm	mm	kg/km	kN	Ohm/km
16	18.4	7	1.83	5.49	50.4	5.43	1.7896
25	28.8	7	2.29	6.86	78.7	8.49	1.1453
40	46	7	2.89	8.68	125.9	13.58	0.7158
63	72.5	7	3.63	10.9	198.3	21.39	0.4545
100	115	19	2.7	13.9	316.3	33.95	0.2877
125	144	19	3.1	15.5	395.4	42.44	0.2302
160	184	19	3.51	17.6	506.1	54.32	0.1798
200	230	19	3.93	19.6	632.7	67.91	0.1439
250	288	19	4.39	22	790.8	84.88	0.1151
315	363	37	3.53	24.7	998.9	106.95	0.0916
400	460	37	3.98	27.9	1268.4	135.81	0.0721
450	518	37	4.22	29.6	1426.9	152.79	0.0641
500	575	37	4.45	31.2	1585.5	169.76	0.0577
560	645	61	3.67	33	1778.4	190.14	0.0516
630	725	61	3.89	35	2000.7	213.9	0.0458
710	817	61	4.13	37.2	2254.8	241.07	0.0407
800	921	61	4.38	39.5	2540.6	271.62	0.0361
900	1036	91	3.81	41.8	2861.1	305.68	0.0321
1000	1151	91	4.01	44.1	3179	339.53	0.0289
1120	1289	91	4.25	46.7	3560.5	380.27	0.0258
1250	1439	91	4.49	49.4	3973.7	424.41	0.0231

4.Packing
Packing in wooden drums,steel wooden drums or as customer"s requirement.


5.Customer Visit   
We have a professional sales team with each of them has engaged in this job for 3-10 years, so that we can provide the comprehensive and professional technology for you. With the perfect quality and after sales service, till now we have exported to more than 80 countries, welcome to visit us and establish win-win establish relationship!



6.Production process:
AAAC conductor producing process is drawing stranding and cabling,our factory possess 2 subsidiaries,Zhulin factory is professional bare conductor workshop with 20 production line.



7.Certificate
As first rank of the cable supplier in China, we have obtained CE, ISO9001, ISO14001, OHSAS certificates, passed the SGS and BV test, and our brand "RMJT" be given China famous brand.



8.About us:
People"s Cable Group Co., Ltd. was founded in 2007, located in Zhengzhou Gongyi economic development zone. Our company has 2 factories (Zhitian factory and Zhulin factory), occupies total area of more than 300,000 square meters, with building area 230,000 square meters. 


9.Contacts
 Vivian Wong
T: 86-371-55632835 | M: 86-18336390736