Supplier Homepage Reducer / gearbox Harmonic reducer Combined type harmonic reducer Harmonics csF-45-120-2UH from the Coordinates of the Hamenaco turntable

Harmonics csF-45-120-2UH from the Coordinates of the Hamenaco turntable pictures & photos

Harmonics csF-45-120-2UH from the Coordinates of the Hamenaco turntable

Purchase Qty. / Reference FOB Price
1 piece	US $2688
20 piece	US $2500

Production Capacity:	15000
Payment Terms:

Send Inquiry

Basic Info

Product Description

Harmonics CSF-45-120-2UH coordinates of the Hamenaco turntable produce radial elastic deformation of a flexible wheel with external teeth and a wave generator mounted inside the flexible wheel in an oval shape with flexible rolling bearings on the outer ring. The gap between them is estimated and the large gap is taken as the line contour error. A schematic diagram of measuring the profile error of a surface with a profile sample of several sections. During the measurement, the harmonics CSF-45-120-2UH of hamenako table were placed on the position of the tested part in the specified direction respectively, and the gap between them was read, and the large gap was taken as the surface contour error.

}3> Projection method For the line contour error of small and thin workpiece size can be measured on the projector. The measured contour is projected on the projection screen and compared with the harmonic CSF-45-120-2uh profile of the limit wheel Hamenako turntable (drawn in advance according to projection magnification). The projection of the actual contour should be between the limit contour lines.

C4) Coordinate method The coordinate values of each point on the measured contour can be measured by using the turntable with indexing device, coordinate measuring indicator, tool microscope, three coordinate measuring machine and other instruments. Harmonics of the Harmonics csF-45-120-2UH of the Hamenako turntable can be compared with the coordinate values of the ideal contour. The contour error can be obtained as a schematic diagram of measuring line contour with indexing turntable and indicator.

}5> Multi-point comparison measurement method For the contour error of medium and small batch production parts, commonly used multi-point comparison method to measure. In other words, multiple measuring sensors (micrometers, indicator tables, etc.) are installed on the probe head of the multi-point measuring device according to the needs of the measured profile. During measurement, all sensors are calibrated simultaneously with contour samples or samples for harmonics CSF-45-120-2UH of hamenaco table coordinates. Then remove the sample or sample and place the measured items in the same position. At this time, the large value in the variation measured by each sensor is the contour error