Net weight of product:1.43 kilograms

  Product Description

  The MB810 ABB communication module base mainly introduces the usage instructions for I/O connection module base,PROFIBUS communication module base,serial communication module base,system interconnection module base,etc.

  The MB810 ABB communication module base provides an address code jumper and communication port.The E-Bus network address of the corresponding module is set through the address code jumper,and the connection with other network components is achieved through the communication port.

  The I/O module base can accommodate any two I/O modules,with two module sockets labeled A(on the left)and B(on the right).On both sides of the base,a set of double-layer terminal blocks is provided for the module,with a total of 36 terminal blocks in each group,

  Structure description:

  Backup battery:When the controller loses power,it can ensure that the controller continues to work to avoid data loss.

  Module connector:used to connect to the local bus and communicate with other local modules.

  Controller address dial switch:used to set the address of the installed controller.

  Controller signal terminal:When the controller serves as a MODBUS RTU slave station,it can be used to connect to the MODBUS RTU master station equipment.

  Base LATCH:Used for base installation and disassembly.