Series:Control System

  Product Description

  The following table lists the functional modules included in the Continuum Power Supply:Model PS 120/240 AC 50PS 120/240 AC 50-UPS–48 DC 50PS 120/240 AC 50-UPS Standard Continuum Power Module provides a 35 watt power input/output module for the CPU and power supply.It also includes functional failures to reduce or eliminate power impact.External 24 VDC battery sources can be connected to provide non interruptible power supply.The built-in battery charger ensures that the battery is fully charged.This device uses a standard rechargeable lead-acid battery,providing a complete UPS including all I/O modules,running at 35 watts of power for up to 60 minutes of consumption;Only complete operation of the CPU module(including modem and network interface)without I/O power supply within 4 hours;The backup of DRAM and Real-time clock only lasts for 72 hours.These backup modes are controlled by selecting and controlling Andover to Plain English®programming language

  PS 120/240 AC 50 This module is a non UPS version of PS 120/240 AC 50-U.This power supply provides a complete power of 50 watts and can also be used as an extended power supply to directly power additional I/O modules,extending typical functional continuous systems and even to remote locations.

  Mechanical installation note:The power supply is suitable for installing in another product inside the casing.The power module can be installed on standard DIN rails or directly onto the panel using screws.The hardware that promotes these two installation methods is an integral part of the case design.Each module has a molded DIN rail guide finger on the back.This design allows the module to easily hang on and slide along standard DIN rails.

  application area

  Building Automation System

  Energy Management System

  Environmental monitoring system