All Aluminum Conductor AAC to BS 215-1 Wasp Ant Spider Fly Bee AAC
1.Applications
ACSR,AAC,AAAC,ASCSR&ACAR conductor widely used in power transmission lines with various voltage levels. since they have such good characteristics as simple structure, convenient installation and maintenance, low cost for the line, large transmission capacity and are also suitable for laying across rivers and valleys where special geographical teatures exist.

2. Specification:
 
(1) all aluminium conductor (AAC)
(2) all aluminimum alloy conductor(AAAC)
(3) aluminum conductor steel reinforced (ACSR)
(4) anti-corrosion type ACSR
(5) aluminimum conductor aluminimum clad steel reinforced(ACSR/AW)
(6)rear earth aluminimum conductor steel reinforced(ACSR/RE)
(7)aluminimum conductor aluminimum alloy reinforced(ACAR)

3.Service Performance
(1).The permissible long-time operating temperature for aerial conductor electronic cable is 70oC.
(2).Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area,the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.
(3).When connecting conductors,the AAC conductor electronic cable beside the connecting tube cant be prominent.Otherwise,the force on the operating conductors will be unbalanced.After connectors are install,the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.
(4).Under installaion,the arc downing stress of all the conductors should be the same.With in the permissible distance of crossing buildings or dropping to the ground,the stress can be 10-15% higher than regular stress.
 
4.Material Standard:IEC83, IEC1089, 31, B232, BS215, DIN48204
 (1). Standard: IEC61089, BS215 part2, ASTM B232, DIN48204, BS EN50182 
(2). Specification: ACSR is composed by bare concentric-lay-stranded galvanized steel  wire(s) with aluminum wires surrounded by one or more layers of helically. Greased ACSR can also be supplied. 
(3). Application: ACSR is widely used in overhead electric power transmission and distribution lines with various voltage levels
 
We can supply this conductor according to different recognized standards, such as IEC61089, BS215, BS EN 50182: 2001, STM B231, CSA C49, DIN480201, JIS C3109, customer special specification also can be satisfied. 
 
5.Technical details
 AAC Technical Characteristics Based on Standard BS215
  

Code name	Nominal aluminum area	Stranding and wire diameter	Sectional area	Overall diameter	Linear mass	Max. DC resistance at 20 ºC	Rated strength	Final modulus of elasticity	Coefficient of linear expansion
	mm 2	mm	mm 2	mm	kg/km	Ω/km	daN	hbar	/ºC
Midge	22	7/2.06	23.33	6.18	63.8	1.227	399	5900	23.0x10 -6
Aphis	25	3/3.35	26.40	7.2	73	1.081	411	5900	23.0x10 -6
Gnat	25	7/2.21	26.8	6.6	73	1.066	459	5900	23.0x10 -6
Weevil	30	3/3.66	31.6	7.9	86	0.9082	486	5900	23.0x10 -6
Mosquito	35	7/2.59	37.0	7.8	101	0.7762	603	5900	23.0x10 -6
Ladybird	40	7/2.79	42.8	8.4	117	0.6689	687	5900	23.0x10 -6
Ant	50	7/3.10	52.83	9.30	145	0.5419	828	5900	23.0x10 -6
Fly	60	7/3.40	63.55	10.20	174	0.4505	990	5900	23.0x10 -6
Bluebottle	70	7/3.66	73.7	11.0	202	0.3881	1134	5900	23.0x10 -6
Earwig	75	7/3.78	78.5	11.4	215	0.3644	1194	5900	23.0x10 -6
Grasshopper	80	7/3.91	84.1	11.7	230	0.3406	1278	5900	23.0x10 -6
Clegg	90	7/4.17	95.6	12.5	262	0.2994	1453	5900	23.0x10 -6
Wasp	100	7/4.39	106.0	13.17	290	0.2702	1600	5900	23.0x10 -6
Beetle	100	19/2.67	106.0	13.4	293	0.2704	1742	5600	23.0x10 -6
Bee	125	7/4.90	132.0	14.7	361	0.2169	1944	5600	23.0x10 -6
Cricket	150	7/5.36	157.9	16.1	432	0.1818	2385	5600	23.0x10 -6
Hornet	150	19/3.25	157.6	16.25	434	0.1825	2570	5600	23.0x10 -6
Caterpillar	175	19/3.53	186	17.7	512	0.1547	2863	5600	23.0x10 -6
Chafer	200	19/3.78	213.2	18.9	587	0.1349	3240	5600	23.0x10 -6
Spider	225	19/3.99	236.9	20.0	652	0.1211	3601	5600	23.0x10 -6
Cockroach	250	19/4.22	265.7	21.10	731	0.1083	4040	5600	23.0x10 -6
Butterfly	300	19/4.65	322.7	23.25	888	0.08916	4875	5600	23.0x10 -6
Moth	350	19/5.00	373.2	25.0	1027	0.07711	5637	5600	23.0x10 -6
Drone	350	37/3.58	373.3	25.1	1029	0.07741	5745	5600	23.0x10 -6
Locust	400	19/5.36	428.5	26.8	1179	0.06710	6473	5600	23.0x10 -6
Centipede	400	37/3.78	415.2	26.46	1145	0.06944	6310	5600	23.0x10 -6
Maybug	450	37/4.09	486.9	28.6	1342	0.05931	7401	5600	23.0x10 -6
Scorpion	500	37/4.27	529.5	29.9	1460	0.05441	7998	5600	23.0x10 -6
Cicada	600	37/4.65	628.6	32.6	1733	0.04588	9495	5600	23.0x10 -6
Tarantula	750	37/5.23	794.6	36.6	2191	0.03627	12010	5600	23.0x10 -6

 
ACSR Technical Characteristics Based on Standard BS 215-2   
 

Code name	Nominal aluminium area	Stranding and wire     diameter		Sectional area of aluminium	Total sectional area	Approx. overall diameter	Approx. mass	Calculated D.C. resistance at 20oC	Calculated breaking load
		Al	Steel
	mm2	No./mm		mm2	mm2	mm	kg/km	Ω/km	kN
RABBIT	50	6/3.35	1/3.35	52.88	61.7	10.05	214	0.5426	18.35
DOG	100	6/4.72	7/1.57	105	118.5	14.15	394	0.2733	32.7
WOLF	150	30/2.59	7/2.59	158.1	194.9	18.13	726	0.1828	69.2
DINGO	150	18/3.35	1/3.35	158.7	167.5	16.75	506	0.1815	35.7
LYNX	175	30/2.79	7/2.79	183.4	226.2	19.53	842	0.1576	79.8
ZEBRA	400	54/3.18	7/3.18	428.9	484.5	28.62	1621	0.0674	131.9

 
 
 AAAC Technical Characteristics Based on Standard BS 3242  
 

Code name	Nominal aluminium area	Stranding and wire     diameter	Sectional area	Approx. overall diameter	Approx. mass	Calculated D.C. resistance at 20oC	Calculated breaking load
	mm2	No./mm	mm2	mm	kg/km	Ω/km	kN
ALMOND	25	7/2.34	30.1	7.02	82	1.094	8.44
CEDAR	30	7/2.54	35.47	7.62	97	0.9281	9.94
FIR	40	7/2.95	47.84	8.85	131	0.688	13.4
HAZEL	50	7/3.30	59.87	9.9	164	0.5498	16.8
OAK	100	7/4.65	118.9	13.95	325	0.2769	33.3
ASH	150	19/3.48	180.7	17.4	497	0.183	50.65
ELM	175	19/3.76	211	18.8	580	0.1568	59.1
UPAS	300	37/3.53	362.1	24.71	997	0.09155	101.5