Aluminium conductor steel reinforced ACSR 240/32 EVN

Aluminum 1350 wires and the steel cores are concentrically stranded and wrapped helically around a central wire. The additional corrosion protection is available through the application of grease to the cores or infusion of the complete cable with grease.
It is applied for large span overhead transmission and distribution lines or overhead ground wire of lines.Temperature of continous use can be up to 75ºC

Bare Conductor Types
(1) all aluminum conductor (AAC)
(2) all aluminum alloy conductor(AAAC)
(3) aluminum conductor steel reinforced (ACSR)
(4) anti-corrosion type ACSR
(5) aluminum conductor aluminum clad steel reinforced(ACSR/AW)
(6)rear earth aluminum conductor steel reinforced(ACSR/RE)
(7)aluminum conductor aluminum alloy reinforced(ACAR)

If your have any interested products, Please feel free to contact our sales team.
We can supply your quality ACSR 240/32  as EVN requirement. 

No.	Item of test	Unite	Requirement		Test result	Judgment
1	Structure Size
1.1	Aluminum wire -Number -Diameter	/ mm	24 3.60±0.036		24   3.585~3.615	Qualified
1.2	Direction of cable		right		right	Qualified
1.3	Diameter of cable	mm	21.6		21.6	Qualified
1.4	Weight: -Conductor -Grease	Kg/km	921 5.51		923 10.5	Qualified
1.5	Al wire lay ratio: - Inner layer - Outer Layer	/	10-16 10-14		14.90 12.71	Qualified
1.6	Steel wire -Number -Diameter	/ mm	7 2.40±0.03		7 2.38~2.42	Qualified
1.7	Direction of steel wire	/	right		right	Qualified
1.8	Diameter of steel core	mm	7.20±0.1		7.24	Qualified
1.9	Lay ratio of outer steel Layer	/	16-22		19.73	Qualified
2	Appearance	/	Smooth and equivalent		Smooth and equivalent	Qualified
3	Inertness	/	Evenly and Closely		Evenly and closely	Qualified
4	The properties of aluminum wire
4.1	Tensile Strength	MPa	≥152		160~171	Qualified
4.2	Wrapping	/	1d winds 8 circles,returns 6 circles,once closely wind		No breaking	Qualified
4.3	D.C resistance at 20ºC	nΩ·m	≤28.264		27.697~28.042	Qualified
5	The properties of steel wire
5.1	Tensile strength	MPa		≥1450	1480~1560	Qualified
5.2	Minium stress of steel wire at 1 percent extension	MPa		≥1280	1357	Qualified
5.3	Elongation in 250mm length on breaking	%		≥3.5	4.8	Qualified
5.4	Torsion(L=100d)	pcs/360°		≥16	30~36	Qualified
5.5	Wrapping	1D		No breaking	No breaking	Qualified
5.6	Mass of zinc coating	g/ m2		≥230	251~280	Qualified
5.7	Adherence of zinc coating	4D/8turns		The zinc coating shall not crack or flake to such an extent that any zinc can be removed by rubbing with bare fingers.	Qualified	Qualified
6	Length per drum	meter		3448+17	3450-3462	Qualified