Supplier Homepage Agriculture/agricultural machinery Cultivation / soil preparation machinery Seaflo Water Pump 12 Volt DC for Garden

Seaflo Water Pump 12 Volt DC for Garden

Purchase Qty. / Reference FOB Price

Production Capacity:
Payment Terms:	LC, T/T, PayPal, Western Union

Send Inquiry

Basic Info

Product Description

Model NO.

SFDP1-033-035-41

Ground Drainage and Irrigation Machinery Type

Pumping Irrigation

Certification

ISO9001:2008, CE, UL

Condition

New

Application Field

Agriculture

Valve

Viton

AMPS

8.0A Max

Product

Water Pump 12 Volt DC for Garden

Duty Cycle

Intermittent

Diaphragm

Santoprene

Pressure

35psi/2.4bar

Port Dimension

Quick Attach

Motor Type

12V DC Permanent Magnet, Totally Enclosed, Non-Ven

Protection

Thermal/Ignition Protection

Trademark

SEAFLO

Transport Package

1PC/Inner Color Box; 10PCS/CTN

Specification

CE ROHS ISO 9001: 2008 GMS SGS

Origin

Fujian, China

HS Code

8413509090

SEAFLO Water Pump 12 Volt DC For Garden

Application:

Agriculture/Yacht / RV/Caravan pressurized water system
Sprayer fixture (Vehicle-mounted sprayer, electric sprayer)
Food beverage filling & liquid transfer
Any other pressurization system

How a Diaphragm Pump Works

The pump is driven by an AC or DC motor
In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamber
Has a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosity

Housings:	Polypropylene
Valves:	Viton/EPDM
Diaphragm:	Santoprene
Fasteners:	Stainless Steel
Motor Shell:	Coated Steel

Motor Voltage	12/24V DC
Type	4 chamber diaphragm pump, self priming, capable of being run dry
Mode	Demand
Certifications Option	CE Approval
Liquid Temperature	140°F (60°C) Max.
Priming Capabilities	6 Feet (1.8 m)
Max Pressure	40psi (2.8bar)
Max Flow rate	17lpm (4.5gpm)
Thermal Overload Protected	Start working when temperature reach 90°C(+-10%)
Inlet/Outlet Ports	10/13mm pyramid hose barb, 13mm angle hose barb
Inlet/Outlet Ports	1/2 NPT thread filter for your choice.
Duty Cycle	Intermittent (under different pressure the continuous working time will also be different)
Motor options	2 pin connector
Motor options	On/off switch

STANDARD PUMP CONFIGURATIONS
Model	Switch	GPM/LPM	PSI/BAR	Max Draw(A)	Valves	Diaphragm	Ports	Voltage	Wire Connections
SFDP1-033-035-41	Demand	3.3/12.5	35/2.4	8	Viton	Santoprene	Quick Attach	12V	2-Pin/Leads
SFDP2-033-035-41	Demand	3.3/12.5	35/2.4	4	Viton	Santoprene	Quick Attach	24V	2-Pin/Leads
SFDP1-045-040-41	Demand	4.5/17.0	40/2.8	15	Viton	Santoprene	Quick Attach	12V	2-Pin/Leads
SFDP2-045-040-41	Demand	4.5/17.0	40/2.8	6	Viton	Santoprene	Quick Attach	24V	2-Pin/Leads
Consult factory for other available models