Supplier Homepage Motor Electric Motors DC motor Jkd2060AC 2phase Hybrid Stepper Motor Driver for Factory Price Suit for NEMA34

Jkd2060AC 2phase Hybrid Stepper Motor Driver for Factory Price Suit for NEMA34

Purchase Qty. / Reference FOB Price

Production Capacity:
Payment Terms:	LC, T/T

Send Inquiry

Basic Info

Product Description

HS Code

903289909

JKD2060AC 2phase hybrid stepper motor driver for factory price suit for NEMA34

Specification:
1. General introduceJKD2060AC is a type of 2 phase hybrid stepper motor driver , this driver input voltage is 24~60V AC ,24V~80V DC, suit for current less 6.0A, diameter is 86mm 2 phase hybrid stepper motor .this driver that adopts similar to the Circuit of servo control which enables the motor to run smoothly. It is widely used in CNC machine , robots,cutting machine,packing machine,plotter, engraving machine and so on.

2. Characteristic

*Average current control,2 phase sinusoidal output current drive
*supply voltage from 24VAC~60VAC,24VDC~80VDC
*Opto-isolated signal I/O
*Overvoltage, under voltage,overcurrent,phase short cicuit protection
*14 channels subdivision and automatic idle-current reduction
*8 channels output phase current setting
* Can drive 2 phase and 4phase hybrid stepper motor when phase current less than 6.0A
*mainly for 86mm(NEMA34)2 phase stepper motor

3.Mechanical Specification

Input Voltage     20~60V AC, 24~80V DC
Output current    2.0A~6.0A
Temperature      working temperature -10°~45°,stocking temperature ~20°~70°
Humidity         Not condensation , no water droplets
Gas             Prohibition of combustible gases and conductive dust
Weight          600g
   1. Electrical indicators Parameter Min Typical Max Unit
Input Voltage(DC) 24 - 90 VDC
Input Voltage(AC) 20 - 60 VAC
Output current 0 - 7.2 A
Pulse Signal Frequency 0 - 200 KHZ
Logic Signal Current 7 10 16 MA

Drawing: