Features

• Step and direction control

• Closed position loop for no loss of movement synchronization

• No loss of steps; no hunting; no overshooting; Direct 110/120/220/230 VAC input

• Operating voltage: 150 - 230 VAC or 212 - 325 VDC

• Load based output current of 0.5 - 6.0 A

• High torque at starting and low speed

• No torque reservation

• High stiffness at standstill

• Significantly reduced motor heating

• Smooth motor movement and extra low motor noise

• Quick response, no delay and zero settling time

• On-board LED panel for custom configuration and motion mode display

• Plug-and-play and no tuning

• Also capable of driving normal 3 phase stepper motor
  

ES-DH2306 is one of the models in Leadshine ES-DH series easy servo drives which can take direct 110/120/220/230 VAC  or 30-100 VDC input voltage, and output 0.5 - 8.2 A continuous load-based current. It is capable of driving NEMA 34 and 42 easy servo motors (stepper motors with encoders) with the position loop closed in real time.

Based on latest DSP technology and adopting Leadshine"s advanced control algorithm, ES-DH2306 easy servo drive applies servo control on easy servo motors. When adopted with an easy servo motor, it combines features of both open loop steppers & brushless servo systems, and offers many unique advances features for excellent motion control system performance.

Compared with traditional brushless servo systems, cost for ES-DH2306 driven easy servo systems is significantly lower. Starting and low-speed huge output torque from an EM-DH2306 driven easy servo motor is way higher than torque from simliar size brushless servo motors. Such systems also outperform comparable traditional brushless servo systems for high standstill stiffness, no hunting (shaking), no overshooting, almost zero settling time, and plug-and-play setup with no tuning for most applications. In addition, plug-and-play setup for almost all applications makes ES-DH2306 driven easy servo system much simple to set up, over hard-to-configure brushless servo systems which usual involve configurations of tens of parameters.

When an ES-DH2306 easy servo drive is implemented with a Leadshine ES-MH series easy servo motor, there is No Configuration Needed for almost all applications. For fine tuning or custom configurations, a user can simply use the on-board  LED display to perform all the setup.
ES-DH2306 driven easy servo systems have been widely adopted by many Leadshine OEM clients to upgrade their open-loop stepper systems or replace brushless servo systems in industries such as CNC machineries, robotics, packaging, textile