CBB65 Super Capacitors AC Motor Electrolytic Capacitors (column,plastic case)
 
 

Features:
1:Widely applied to starting and running of AC single-phase motors at 50Hz/60Hz frequency power.
2:Self-healing property.
3:High stability and reliability.

Motor capacitor, oil capacitor, IGBT capacitor, aluminum case capacitor , anti-explosion capacitor  ,CBB65 motor run capacitor,CBB61 capacitor, air conditioner capacitor ,fan capacitor, inverter welding capacitor, 
 
The capacitor takes heavy-edge metallized Al/Zn PP film as electrodes and dielectric. Its components are sealed with flame-retardant epoxy resin. It has cylindrical outline with high moisture resistance and stability. 
 
Applications: 
Broadly applied to starting and running of AC single-phase motors at 50Hz(60Hz) frequency for washers and high efficiency compressors of refrigerators etc. 
 
Technical Specifications:
Standard:IEC 60252-1:2001
Technical features:
Climate type:40/70/21 or 40/85/21
Capacitance tolerance:± 5%
Insulation Resistance:≥3000S(MΩ·µF)
Dielectric dissipation factor:tgδ≤0.002 (50Hz~100Hz)

Application requirements:
Altitude:≤2000m
Residual voltage in application :less than 10% of rated voltage.
Allowed maximum voltage: less than 1.1 times of rated voltage
Permissible maximum current: less than 1.3 times of rated current 

Dimensions & specifications (mm):
 

Rated voltage(VAC)	Nominal capacitance(μF)	Size(mm)
		D	H
200,250,370,  400,440,450,600  ,700,1200	1,1.2,1.5,2,2.5,3,3.5,4,4.5,  5,5.5,6,6.5,7,8,10,10.5,11,  11.5,12,15,16,20,25,30,35,  40,45,50,55,60,  12+6, 10+5.5, 13+6,…	30,32,35,40, 41,43,45,46, 50	47,57,65,73,80,84,85,98,105,110

 
Note:1,Terminal leads are wires or 250# (187#) single (dual) tab(s). 
         2,Other dimension serials can be specified in pursuance of customer's request. 
 

reference standards	GB/T 3667.1 (IEC60252-1)
Climatic category	40/70/21,  40/85/21
Class of operation	Class B (10000h) Class C (3000h)
Class of safety protection	P0/P2
Voltage range	200~500VAC
Capacitance range	1~60 µF
Capacitance tolerance	±5%
Dissipation factor	20×10-4 (100Hz,20ºC)
Test voltage terminal to terminal UTT	2 Un for 2 seconds
Test voltage terminal to case UTC	(2Un+1000)VAC or  2000VAC-50Hz for 60 seconds
Insulation Resistance	≥3000MΩ.µF(100Hz,20ºC,1min)

 
Dimensions:
 

specifications	routine		with screws or pins
	450VAC	250VAC	450VAC	250VAC
1µF	Φ26*52	Φ26*52	Φ30*52	Φ30*52
2µF	Φ26*52	Φ26*52	Φ30*52	Φ30*52
2.5µF	Φ26*52	Φ26*52	Φ30*52	Φ30*52
3µF	Φ26*52	Φ26*52	Φ30*52	Φ30*52
3.5µF	Φ26*52	Φ26*52	Φ30*59	Φ30*52
4µF	Φ28.5*55	Φ26*52	Φ35*62	Φ30*52
4.5µF	Φ28.5*55	Φ26*52	Φ35*62	Φ30*52
5µF	Φ28.5*55	Φ26*52	Φ35*62	Φ30*52
5.5µF	Φ34*62	Φ26*52	Φ35*62	Φ30*52
6µF	Φ34*62	Φ26*52	Φ35*62	Φ30*52
6.5µF	Φ34*62	Φ26*52	Φ35*62	Φ30*52
7µF	Φ34*62	Φ26*52	Φ35*62	Φ30*52
8µF	Φ34*62	Φ26*52	Φ35*62	Φ30*52
9µF	Φ34*62	Φ26*52	Φ35*62	Φ30*52
10µF	Φ34*62	Φ26*52	Φ35*72	Φ30*52
12µF	Φ37*73	Φ26*52	Φ35*72	Φ30*61
14µF	Φ37*73	Φ34*62	Φ40*72	Φ30*61
15µF	Φ37*73	Φ34*62	Φ40*72	Φ30*61
16µF	Φ37*73	Φ34*62	Φ40*72	Φ30*61
18µF	Φ37*73	Φ34*62	Φ40*72	Φ35*67
20µF	Φ40*70	Φ34*62	Φ40*72	Φ35*67
25µF	Φ42*80	Φ42*62	Φ40*72	Φ35*67
30µF	Φ42*90	Φ40*72	Φ45*95	Φ40*72
35µF	Φ45*90	Φ40*72	Φ45*95	Φ40*72
40µF	Φ50*100	Φ42*90	Φ50*110	Φ40*97
45µF	Φ50*100	Φ42*90	Φ50*110	Φ40*97
50µF	Φ50*100	Φ42*90	Φ50*120	Φ40*97
60µF	Φ50*115	Φ42*90	Φ50*120	Φ40*97

Note:Other specifications,size and terminal outside table are negotiable.  
 
III. Testing:
Our each process, each parts will be tested by our each production department with professional testing facilities to keep the quality proved.


IV. Packing:
Each product will be packed by waterproof packages, then put in the thick and good quality cartons, around the products, some protecting materials will be toegther, then we seal it carefully to make the complete packing. After, we pile them carefully on the good-quality pallets. Finally the outside covers waterproof materials again to make it stronger and avoid the delivery problems.


V. Our Service:

A. Design Services:
1. Design Research
2. Strategy
3. Industrial Design
4. Engineering
5. Prototyping
6. Brand Support

B. Product Sampling:
1. Material Testing
2. Bronze Level
3. Silver Level
4. Gold Level
5. Final Product
6. Certified & Assured

C. Quality Control
1. Raw Material
2. Preproduction Samples
3. in-process standards
4. Pre-shipping


D. Certification:
1. SGS; CE, UL VDE etc.
2. Intertec
3. Bureau Veritas
4. Testing Company of Your Choice

E. Packaging:
1. Retail Packaging
2. Customized
3. In-house Designers
4. Durability Testing
5. Sampling

F. Delivery:
1. Freight - Forwarding
2. FOB, CIF , DOOR TO DOOR
3. EXPRESS, AIRDELIVERY, SEADELIVERY. 

G. After-Sales:
1. Modify Future Orders
2. Alternative Products
3. Find New Suppliers
4. Additions to Range



Advanced One-Stop Purchasing Service. Welcome !
 Gordan
Changzhou Andwin International Corporation Limited
Add.:  No.91 Hanjiang Road New District Changzhou Jiangsu, CHINA
Website:  www.czandwin.com
   
Mob.:  0086 18136599633  / Tel.: 0086 519 83984950-801 / Fax.: 0086-519-83984950-808