Series:MicroLogix

  Product Description

  The 1762-IF4 A-B 4-point analog input module is an input device used to convert analog signals into digital signals,used to connect sensors and control systems.

  feature

  4 analog input channels

  High resolution measurement

  Wide input voltage range

  Compact design

  1762-IF4 is a small four(4)differential channel analog input module.This module supports 4-20MA and-10 to 10V DC signals.This module can be used for Micrologic x1100,1200,and 1400 programmable logic controllers.

  1762-IF4 is an Allen Bradley miniature Lodge x1200 with a four channel current/voltage analog input module.It has a Delta Sigma converter and 4 differential(bipolar)inputs.Its simulated operating voltage range is-10 to 10 volts DC normal and-10.5 to 10.5 volts DC full size.Its simulated operating current range is 4-20mA normal and-21-21mA full scale.This module enhances the functionality of MicroLogix by allowing the addition of I/O to the system.It requires the minimum spacing and can be DIN rail or panel mounted.This module communicates and receives information about the 5-24 volt DC power through the 1762 bus interface.

  When wiring input terminal blocks,a safety cover is present.Connect various I/O modules with a flat ribbon cable.The 1762-IF4 module supports 2-wire,3-wire,or 4-wire transmitter configurations.During the troubleshooting process,users should always stay away from the device and always check for any program changes.The safety circuit should always be connected in series with the main relay

  The 1762-IF4 module should be installed in a non hazardous,dry,and clean environment,and the circuit should not cross overvoltage according to Class II standards.To avoid damaging the module,always prevent electrostatic discharge and remove power.A field upgradeable flash operating system helps ensure that users can always update the latest features without having to replace any hardware.I/O counting can be extended by using lockless I/O modules.This leads to larger control systems,greater application flexibility,as well as lower costs and reduced parts inventory scalability.

  This module has four(4)input channels,each of which can be configured to receive current and voltage signals of-21 to 21mA and-10 to+10VDC,respectively.

  The selection of input signal type is achieved by providing a DIP switch.The received voltage signal is converted into binary encoding stored in the analog input register through an analog-to-digital(ADC)converter.The converted data can be formatted as raw/proportional and proportional for use.

  If used together with Weiluoji x1100,a maximum of four(4)expansion modules are allowed,possibly 1764-IF4.If 1200 micrologix is installed,six(6)expansion modules can be connected,and seven(7)modules can be connected to 1400 micrologix.

  Expansion modules such as 1764-IF4 are connected to the microLogix bus through pin points installed on the front panel of each module and provided ribbon cables.The installation of this module follows the installation method of the micro Rockix base module,especially for DIN rail or direct panel installation.

  The dimensions of this module are 90mm(height)x 87mm(depth)x 40mm(width),including installation labels of 110mm 3.54 inches.

  application area

  The 1762-IF4 A-B 4-point analog input module is a high-performance analog input device suitable for various industrial control and automation applications,with characteristics such as high precision,low noise,and fast response.Widely used in industrial fields such as temperature control,pressure control,and liquid level control.