Aluminum clad steel strand wire(ACS)

Application    Aluminum-Clad Steel Wire Strand Conductor is a bimetallic wire which steel wire is covered by Aluminum evenly with advantages of good .electric conductivity, anti corrosion, good high frequency transmission and high intensity. Aluminum-coated steel core aluminum stranded wire is a stranded wire which strands Aluminum-Clad Steel wire as reinforce core with aluminum wire.
Compared with common Aluminum conductor steel reinforced, Aluminum-Clad Steel Wire Strand Conductor has the following advantages of 5% weight reducing, 2-3% load increase, 4-6%
electric loss reduction, longer life and no extra cost. It is widely used for electric transmission line conductors, especially for coastal areas,salt alkali beach, grade 3 or grade 4 polluted industrial zone and the place with requirement of enlarged Aluminum steel cross-section ratio.
 
standard    Products can be manufactured according to GB standard, IEC standard, ASTM standard, BS standard and DIN and other standard andcustomers'specific requirements.
 

SA1A	SA1B
						IEC61089
Nominal Area St	Code Number	Area	Number of Wires	Diameter		Linear Mass		Rated Strenghth		Max.D.C. Resistance at 20ºC
				Wire	Cond.	SA1A	SA1B	SA1A	SA1B
mm2		mm2		mm	mm	kg/km	kg/km	kN	kN	Ω/km
15	4	12	7	1.48	4.43	80.1	79.4	16.08	15.84	7.1592
20	6.3	18.9	7	1.85	5.56	126.2	125	25.33	24.95	4.5455
30	10	30	7	2.34	7.01	200.3	198.5	40.2	39.6	2.8637
35	12.5	37.5	7	2.61	7.84	250.4	248.1	50.25	49.5	2.291
50	16	48	7	2.95	8.86	320.5	317.5	64.32	63.36	1.7898
75	25	75	7	3.69	11.08	500.7	496.2	93.75	99	1.1455
120	40	120	7	4.67	14.02	801.2	793.9	132	158.4	0.7159
120	40	120	19	2.84	14.18	805	797.7	160.8	158.4	0.7194
200	63	189	19	3.56	17.79	1267.9	1256.4	240.03	249.48	0.4568
300	100	300	37	3.21	22.49	2017.3	1999	402	396	0.2884
350	125	375	37	3.59	25.15	2521.7	2498 3	476.25	495	0.2307
450	150	480	37	4.06	28.45	3227.7	3198.3	580.8	633.6	0.1803
600	200	600	37	4.54	31.81	4034.7	3997.9	684	792	0.1442
600	200	600	61	3.54	31.85	4040.6	4003.8	762	792	0.1444

 
 

SA2
					IEC61089
Nominal Area St	Code Number	Area	Number of Wires	Diameter		Linear Mass	Rated Strenghth	Max.D.C. Resistance at 20ºC
				Wire	Cond.
mm2		mm2		mm	mm	kg/km	Kn	Ω/km
35	16	36.2	7	2.56	7.69	216.4	39.04	1.7896
55	25	56.5	7	3.21	9.62	338.2	61	1.1454
100	40	90.4	7	4.05	12 2	541.1	97.61	0.7159
100	40	90.4	19	2.46	12.3	543.7	97.61	0.7193
150	63	142	19	3.09	15.4	856.4	153.73	0.4567
220	100	226	37	2.79	19.5	1362.6	244.02	0.2884
300	125	282	37	3.12	21.8	1703.2	305.02	0.2307
350	160	362	37	3.53	24.7	2180.1	390.43	0.1803
450	200	452	37	3.94	27 6	2725.1	488.03	0 1442
450	200	452	61	3.07	27.6	2729.1	488.03	0.1444

 
 

						ASTM B416
Code Number	Area	No.of wires	Diameter		Weight	Rated Strengh	Max.D.C. Resistance at 20ºC
			Wire	Cond.
	mm2		mm	mm	kg/km	kN	Ω/km
3 N0 5Awg.	50.32	3	4.62	9.96	334.1	54.42	1.699
3 No 6Awg.	39	3	4.11	8.87	265.0	45.74	2.142
3 N0 7Awg.	31.65	3	3.67	7.9	210.1	38.36	2.701
3 No 8Awg.	25.1	3	3.26	7.03	166.7	32.06	3.406
3 N0 9Awg.	19.9	3	2.91	6.26	132.2	25.43	4.294
3 N0 10Awg.	15.78	3	2.59	5.58	104.8	20.16	5.415
7 N0 5Awg.	117.4	7	4.62	13.9	781.l	120.27	0.7426
7 N0 6Awg.	93.1	7	4.11	12.4	619.5	101.14	0.9198
7 N0 7Awg.	73.87	7	3.67	11	491.1	84.81	1.160O
7 No 8Awg.	58.56	7	3.26	9.78	389.6	70.88	1.463
7 N0 9Awg.	46.44	7	2.91	8.71	308.9	56.2	1.844
7 N0 10Awg.	36.83	7	2.59	7.76	245.1	44.58	2.325
7 No l1Awg.	29.21	7	2.3	6.91	194.4	35.35	2.932
7 N0 12Awg.	23.16	7	2.05	6.16	154.2	28.03	3.697
19 No 5Awg.	318.7	19	4.62	23.1	2129.0	326.39	0.2698
19 N0 6Awg.	252.7	19	4.11	20.6	1688.0	274.55	0.3402
19 N0 7Awg.	200.4	19	3.67	18.3	1339.0	230.18	0.429
1g N0 8Awg.	158.9	19	3.26	16.3	1062.0	192.41	0.5409
19 N0 9Awg.	126.1	19	2.91	14.5	842.0	152.58	0.6821
19 N0 10Awg.	99.96	19	2.59	12.9	667.7	121.00	0.8601
37 N0 5Awg.	620.6	37	4.62	32.3	4170.0	635.43	0.1394
37 Na 6Awg.	492.2	37	4.11	28.8	3307.0	534.85	0.1757
37 N0 7Awg.	390.3	37	3.67	25.7	2623.0	448.09	0.2216
37 No aAwg.	309.5	37	3.26	22.9	2080.0	374.67	0.2794
37 N0 9Awg.	245.5	37	2.91	20.3	1649.0	279.11	0.3523
37 N0 10Awg.	194.7	37	2.59	17.9	1308.0	235.61	0.4443

 
 
 

						DIN 48201
Code Number	Area	No.of Wires	Diameter		Weight	Rated Strength	Max.D.C. Resistence at 20ºC
			Wire	Cond.
mm2	mm2		mm	mm	kg/km	KN	Ω/km
25	24.25	7	2.1	6.3	162	31.56	3.546
35	34.36	7	2.5	7.5	229	44.72	2.499
50	49.48	7	3	9	330	64.4	1.736
70	65.8l	19	2.1	10.5	441	85.65	1.313
95	93.27	19	2.5	12.5	626	121.39	0.925
120	116.99	19	2.8	14	785	152.26	0.737
150	147.11	37	2.25	15.7	990	191.46	0.587
185	181.62	37	2.5	17.5	1221	236.38	0.476
240	242.54	61	2.25	20.2	1635	299.05	0.357
300	299.43	61	2.5	22.5	2017	369.2	0.289

 
 
Feature:
Huatong Cable Inc. 
 (1),More than 30 years experience.
 (2) ,100,000m² factory,200 staffs,annual output 100,000 metic tons.
 (3),Sound Quality Control
    --Material inspection;
    --manufacturing inspection;
    -- Finished products inspection;
    -- Inspection before delivery.
    --Third party inspection.
    -- Inspection of storage at port of departure.
 (4),ISO Certificated.
 (5) ,Plenty of material and lobor gurantee the delivery prompt and price competitive