The feed production line plays for feed industry to produce pellet or powder feed for aqua, livestock and poultry. We are manufacturing animal feed making machine, for example, Chicken feed making machine, pig feed making machine, cattle feed making machine, fish feed making machine, poultry feed making machine for exportation.


Brief introduction for flow process:

SKJZ5800 Feed set adopts manual batching system with 5-6t/h output for mesh feed 4-5t/h output for pellet feed. The raw material should be weighed in advance before feeding into the production line through two different dumping hopper, in which the material need to be grinded should go into the hammer mill through granule inlet in batches, hammer mill use the pre-cleaner as the feeder, the material no need grinding will go into the production through powder inlet after weighed in advance, then mixed in mixer, the material after mixing can go into the FP bins directly to be mesh finished products. It can also go into the pelletizing process to be pelletized, cooled, finally packed by manual weighing.

The total power of the feed set is about 172Kw, dimension is : 13x6x11m, matching 0.5T boiler. The feed set use splicing type frame and is characterized by compact design and reasonable structure, and the satisfaction of environment protection requirements, meanwhile it can be directed to customers design.

Technological process chart:

RM receiving and cleaning process--Grinding process--Mixing process--Pelletizing and cooling process --Auxiliary process


 

Technological characteristics and introductions:

RM receiving and cleaning process: granules and powder material will be put into the production line separately though two inlet, the granules will be screened and cleaned to remove impurities by pre-cleaner, then remove the iron before it go into the hammer mill, the powder material should be cleaned in advance.

Grinding process: adopts FDSP"s tear circle hammer mill which can make both coarse grinding and fine grinding, the feeder is combined together with the pre-cleaner which can clean the material and also feeding into the hammer mill, variable frequency control, evenly feeding and equipped with pulse filter. Mechanical induct discharging. The process is simple and with low cost, it is suitable for small capacity and multi type of material"s grinding.

Grinding machine: hammer mill SFSP568-II with power 37KW, output: 5-6t/h

Mixing process:there is pre-mixing bin upper the mixer which can make the feeding continuously  when mixer working, the mixed material can go into the pre-pelleting bin and mesh feed bins separately to meet the requirement for producing mesh feed and pellet feed at same time.

Mixing equipment: double shaft paddle mixer SHSJ1 with 11kw, 500kg/P, homogeneity CV≤5%

Pelletizing process: adopt one pellet mill with single conditioner which is suitable for normal poultry feed and ruminant feed production. the material go into the cooler directly after pellet mill, then go into the crumbling and screening system through bucket elevator, manual packing at last.

Pelletizing equipment: pellet mill SZLH350 with 55kw, output:3-7t/h.( ¢3.5 normal broiler feed formula)

Cooling equipment: counter flow cooler SKLN2.5 with output 5-6t/h

Crumbler: SSLG15x100 with output 3-5t/h, it can crumble the large feed pellets into small pellets to produce small chicken grow seedling feed. the crumbler is designed with by pass system so the material can be go into the screener though by pass when no need to use crumbler.

Screening equipment: plan rotary screener SFJH80×2C with capacity 4-6t/h

Auxiliary system: liquid adding system could adding oil into the mixer to improve feed palatability. Air compressing system is used to supply compressed air for pneumatic components.



Performance Parameters: