Features:1, trenching ridge

Remove the speed control device, install the opener, adjust the width and height of the opener, and then open the ditch.

2, short-distance transportation

The front arm of the car is mounted on the towing body of the walking box, and the traveling wheel is mounted on the driving shaft of the running mechanism for transportation. The rated load is 250kg, and the speed of the fast gear is about 10km/hour at the rated speed of the engine. The slow speed is about 5km/hour.

3, multi-function work

Remove the protective cover of the gearbox, unscrew the bolt at the rear end of the spindle, take out the key sleeve on the shaft, and attach the matching pulley or coupling to the rear end of the gearbox with bolts. The pulley groove section adopts the ordinary V-belt type A. The pulley is calibrated at a speed of 3000 rpm. When equipped with the corresponding equipment and accessories, it can be used for pumping, sprinkling, spraying, threshing, threshing and other multi-functional operations.


Product description
On the drive shaft of the tiller running mechanism, the rotary tiller assembly is installed on the right and left, and then two M8×55 bolts are axially positioned to perform the rotary tilling operation.
 

Rotary tillage device form	Four groups		Five groups
	3 knife	4 knife	3 knife	4 knife
Number of rotary knives	3×8	4×8	3×10	4×10
Rotary tillage width(mm)	1050		1200
Adapt to the situation, soil quality	Insufficient water in paddy fields, large soil viscosity	Harder soil	The cultivated land is wet after the rain	Drought or high crop

Technical Parameters
 

Mimi- tiller	Dimensions (length x width x height) (mm)		1390*800*1070
	Net weight (kg)		≥60
	Transfer method		Belt drive
	Plowing width		800-~900
	Ploughing		80~250
	Production efficiency (mu / hour)		dry land:0.6~1; Paddy field :1~2
	Shift gear	IZ-80	One slow block, one fast block, one neutral block
		IZ-80A	One forward gear, one reverse gear, one neutral gear
Supporting power	Model		HS168FB Air-cooled gasoline engine
	Type		Single cylinder, air cooled four stroke, OHV, 25°, horizontal axis
	Bore diameter x stroke(mm)		Φ68x54
	Displacement(ml)		196
	Compression ratio		8.5:1
	Calibration power kw/3600rpm		3.8/3600
	Maximum torque N.m		10.5
	Ignition method		No touch, transistorization
	Startup mode		Hand-drawn rope recoil start
	air filter		Oil bath air filter
	Fuel tank capacity(L)		3.6
	Economic fuel consumption(g/kw·h)		≤395
	Oil capacity(L)		0.6

 Semi-feeding 4LBZ series