1.1. Size:Dia:16*15.5*18.6mm
1.2. End Play:0.5mm MAX 
1.3. Operating Temperature:    -10 ~ +60°C

Note:

        1. Shaft length,D-shaped size and length can be custom made.

        2. L is 14 and redcution ratio: 100:1

        3 Reduction ratios for option:

2.1.MEASURING CONDITIONS
       1.1.Rated voltage:             6  V DC
       1.2.Motor Position:            To be measured with motor horizontally held.
       1.3.Environmental temperature:25±10°C.
       1.4.Environmental humidity:65%±20%RH.

2.2.ELECTRICAL CHARACTERISTICS (At initial stage after 30 seconds run-in): 
      2.2.1.At No load
            2.1.1.Speed:              146.3 ±12%rpm
            2.1.2.Current:            0.084  A(max   0.17A)

      2.2.2.At On load
            2.2.1.Torque:             0.28 kg.cm
            2.2.2.Speed:              126.5 ±12%rpm
            2.2.3.Current:            0.18  A (max   0.27A)

      2.2.3.Direction of Rotation:      CCW  (Counter-Clockwise when viewing from the output shaft end with positive voltage applied to positive terminal.)

Remark:The above technical datas are only for reference,we can customerize them according to different requirements after evaluation.