Jiaozuo Golden hoop electric hydraulic brake accessories electric hydraulic brake conforms to JB / zq4388-97



The technical conditions comply with JB / t6406-2006 standard, which is mainly applicable to the mechanical braking of mechanical driving devices such as hoisting, transportation, metallurgy, mining, port and construction



1.2 the service conditions of this series of brakes are as follows:



(1) The temperature of surrounding medium shall not be higher than + 45 ℃ and not lower than - 25 ℃;



(2) The relative humidity of the air shall not be greater than 90%;



(3) In places without flammable, corrosive and explosive hazards;



(4) For AC power supply (please pay attention to the motor nameplate);



(5) Tilt mounting is allowed



(6) The altitude shall comply with gb755-2000



2. Structure



This series of electro-hydraulic brakes is composed of brake frame and matched electro-hydraulic thruster: driving part: 1. Electro-hydraulic thruster; 2. Oil filling plug; 3. Leverage; 4. 8. Tighten the nut; 5. Brake spring; 6. Pull rod; 7. Torque fine adjustment locking nut; 9. Threaded joint; 10. Spring pull rod; 11. Torque adjusting nut; 12. Brake arm; 13. Brake shoe; 14. Brake pad tracking device; 15. Connecting bolts; 16. Back distance equalizing device; 17. Base; 18. Fixing pin;



3. Check whether the brake is damaged or missing during transportation or storage before installation; Check whether the brake wheel surface is clean. If there is grease or other dirt, clean it Brake