Number of grooves on grinding wheel. Grinding wheel hardness is high, and the workpiece contact area is large, the groove should be opened more Hamanaco groove custom harmonic SHG-45-100-2UH, otherwise should be less open; The grinding workpiece surface roughness is low, the workpiece feed speed is low, the grinding hard alloy contains more carbide chin, the groove should be more open. In order to ensure the safety of grinding wheel, the grinding wheel after grooving should be carefully checked. For grinding wheels with an outer diameter greater than 200mm, test run is required. Generally, grinding wheels with small diameter customized harmonic SHG-45-100-2UH grooves should also be operated for 3min after installation, and grinding can be started only after there is no abnormal situation.
Grinding wheel grooving method. The grinding wheel can be slotted by hand or by motorized method. Hamanaker Grooves custom harmonic SHG-45-100-2UH. The thin slice grinding wheel and sand bar are used for manual slotting. With a toothless saw to add 20 "a 26 # silicon carbide abrasive and water mixed into a slurry of abrasive grooves; Grooving with cutting grinding wheel, etc.



C4) Process parameters of intermittent grinding. When groove grinding wheel is used for intermittent grindin